One of the games that people love to go through the nightlife is a pool game. It is a simple game that enhances one’s brain and at the same time allows the body and mind to relax. It is one sport that is addictive. If you have had a long day and you just want a less strenuous physical activity that will help you unwind then this is the best option. Have you ever wondered at one point what the game equipment entails especially the cues? If not then check pool cue products here: https://www.pingpongperfect.com/best-pool-cue-review/.
Without the cue stick then there is no pool game. It is just like the table tennis paddle. It is the equipment that is responsible for hitting the ball to the desired location. It is the one that is responsible for striking the main cue ball which in turn, pushes the rest of the balls to the hole. The main material that makes the cue is wood. Although others are made of graphite or carbon or fiberglass, all in all, they must have the same measurement and weight.
The standard length of a cue is 58 inches long and it has to weight at least 18 ounces and at most 22 ounces, with a diameter of between 0.5 inches to 0.52 inches. The main parts of the cue are the tip, ferrule, shat, a joint collar which includes the handle. The shaft length and the handle length is 29 inches and the tip diameter is also 0.5 inches. The joint collar is designed such that a player can fold it and store it in a portable bag.
The wooden cue stick is simple to make as long as you have some woodworking skills. The best type of wood is the exotic wood. Softwood is light in weight while hardwood is heavy. The heavier the cue stick the difficult it is when it comes to cueing as much as you use less strength compared to a lightweight which is simple and efficient to maneuver although you have to apply more weight.
First, you need to mount the wood on a lathe machine to give it the round shape as you turn the shaft from the tailstock giving an allowance of an inch. At this point return the tailstock to its position to get a square shape of the wood chunk. You should have an angle difference of a maximum of 3 degrees between the tailstock and the headstock. In this case, you now need to get a good position of the shaft and the tailstock to avoid any vibrations. Using a drill, get rid of the live center by positioning it on the tailstock. The drill should make a one and quarter-inch of a hole through the shaft. You now need to the hole and mount a tap using the drill to position the brass insert. Using the bold, you can now thread the pin using a glue them carefully bolt it back.
You now need to work from the tailstock to the headstock to get the recommended diameter to get the seven eighth diameters. You must have the plastic rings on the headstock and separate them using a silver ring. The last activity s to finish the shaft by giving the 4-inch allowance and use a leather polish; you now need to measure the headstock and tailstock diameter to get the standard measurement and lathe it to get the desired results.